Key Features
- Fast set, eliminates clamping or reduces clamp time
- Bonds stronger than wood
- Excellent heat and solvent resistance
- Unaffected by finishes
- Triple distilled for purity and consistency
- Impact-resistant
- No-clog applicator for easy use and waste reduction
- Adhesion of pen tubes to blanks in pen making
Wood adhesive instant bond interior – medium viscosity – 2 ounces Provides a strong, permanent bond. Ideal for hard to reach joints or surface areas that are difficult to clamp, for filling knots and voids in wood, adhering pen tubes to blanks for pen turning applications and for soaking end-grain to prevent splitting. Designed primarily for wood and wood products. Also effective on a wide variety of materials and substrates. 120 cps viscosity offers an assembly time of 7 seconds and an initial cure speed of 5 seconds. Not intended for exterior use or where moisture is likely. Mil spec (a46050c) type ii, class 2. Between 2800 and 4200 psi shear strength at room temperature depending on substrate tested.
Titebond instant bond is a two-part bonding system that takes between 5 to 15 sec to set and 30 to 60 sec for initial cure. It provides a strong, permanent bond and is ideal for hard to reach joints or surface areas that are difficult to clamp. Designed primarily for wood and wood products, this adhesive is also very effective on a wide variety of materials and substrates. Titebond instant bond medium viscosity product offers an assembly time of 7 sec and an initial cure speed of 5 sec. In addition to typical bonding applications, it is ideal for filling knots and voids in wood, adhering pen tubes to blanks for pen turning applications and for soaking end-grain to prevent splitting. Provides a strong, permanent bond. Ideal for hard to reach joints or surface areas that are difficult to clamp, for filling knots and voids in wood, adhering pen tubes to blanks for pen turning applications and for soaking end-grain to prevent splitting. Designed primarily for wood and wood products. Also effective on a wide variety of materials and substrates. 120 cps viscosity offers an assembly time of 7 seconds and an initial cure speed of 5 seconds. NOT intended for Exterior use or where moisture is likely. MIL Spec (A46050C) Type II, Class 2. Between 2800 and 4200 psi shear strength at room temperature depending on substrate tested.
There are no reviews yet.